16

PLATINUM BWP FLUSHDOOR

The BWP grade flushdoor uses the matured Meghalaya Pine
Subtrate assembled mechanically
with Zero Gap bonded with Marine grade plywood
on both sides by using face veneers of thickness
0.4mm and core of thickness 2.5mm from matured
Timber. GLP technology imparts 100% shield against
attack of Borers and Termite and other Micro
organism.

THICKNESS: 32 MM & 35 MM
Size
  • 78x26, 80x26, 78x31, 80x31, 78x36, 80x36, 78x38, 80x38

Product Description

APPLICATION

Nipponply flushdoor shutters are widely used for
residential and commercial complexes, schools,
restaurants, hotels, offices, cinema halls, apartments
etc.

NIPPONPLY’S EXCLUSIVE SPECIALITY

Decorative veneer face
Direct Polish/Duco paint can be done.

NIPPONPLY’S EXCLUSIVE SPECIFICATIONS

  • 100% Phenol Bonded
  • Zero Gap
  • Eco Friendly
  • Low Emission
  • Weather Resistant
  • Presended Core
  • Acoustical Effectiveness
  • 100% Seasoned & Virgin Meghalaya Pine Wood

MEGHALAYA PINE

100% Meghalaya pine – Oil rich seasoned, naturally
cultivated, zerogap & high density wood.

Technical Specification

1 Dimension Length, Width - + 5 mm Thickness - + 1mm Within Limits
2 Squareness Deviation not more than 1mm on a length of SDD mm Deviation not more than 1mm on a length of SDD mm
3 General Flatness Twist, cupping, warpingnottoexceed6 mm
4 Local Planeness Depth of deviation at any point to be less than 0.5 mm Within Limits
5 Impact Indentation Test Depth of Indention not to excedd 02 mm Within Limits
6 Within Limits The deflection at the maximum load shall not be more than 1/3D of length and 1/15 of width and the residual deflection should not be more than 1/10 Satisfactory
7 Edge Loading Test Deflection of edge with max. to be less than 5 mm Deflection of edge with max. to be less than 5 mm
8 Shock Resistance Test No visible defect aftertest No Visible Damage
9 No Visible Damage Initial Deflection -<50mm Residual Deflection -<5 mm Within Limits
10 Sla mmingTest No visible damage after test No Visible Damage
11 Misuse Test No deformation after test No deformation after test
12 Varying Humidity Test No visible warping, twisting or de-lamination No such defects observed
13 End Immersion Test No de-lamination at the end No de-lamination
14 Knife Test Minimum Pass Standard Excellent
15 Glue Adhesion Test Node-lamination Node-lamination
16 ScrewWithdrawal Test Load to withdraw the screw shall not be less than 1000 N 1250 N